Artec HT-TBL Pro tri blend – sound hole -mic – EQ preamp with PP607 piezo XLR

£87.99

5 in stock

Description

cover image


This listing is for an Artec HT-TBL Acoustic guitar preamp.

Comes with PP607 Piezo Pickup and PPO jack kit.

Also includes magnetic and condenser mic pickups.

This item is brand new from Artec without official packaging.

Artec are one of the largest suppliers of preamps and you will find many rebranded preamps on high end guitars. Don’t waste your time with cheap preamps as you will not achieve a good sound and will end up with a hole in your guitar.

Fitting templates available at www.artecsound.com or message us at www.lifelongmusic.co.uk and we can email you the templates.


HT-TBL  Triphonic Blender

HT-TBL is designed for an ‘all in one‘ unit that blends the sounds from a Condenser Microphone, a Soundhole Magnetic pickup & an under saddle Piezo pickup.
It features 3 band equalizer – Bass, Middle, Treble – with Magnetic / Piezo pickup blender, Microphone controllers (Sharpness & Level), Low battery check LED, Phantom power LED, Phase reverse switch for Anti feedback and Master volume.
It is powered by 9 V battery or 48 V phantom power.

Magnetic – Piezo Blender is a blending system that blends the signals from a Soundhole Magnetic pickup and a under saddle Piezo pickup.

Microphone controller is composed with two features – Level controller & Sharpness controller for the fine control. ARTEC provides the finest condenser microphone with all Mic-blending model.

BASS controls to adjust the amount of gain at 80 Hz, MIDDLE controls to adjust the amount of gain at 800 Hz, TREBLE controls of gain at 3 kHz and all controls can be boosted or cut the amount of 12 dB.

Nominal input level: 

Frequency Response: 
Input Impedance: 
Output Impedance: 
Power Supply: 
Battery Life: 
Bass control range: 
Middle control range 
Treble control range 
Presence control range:
Notch Frequency
Low Battery:
Current Drain:
Input Jack: 
 Unbalanced Output Jack
Balanced Output Jack

 

-20 dBV

20 Hz – 20 kHz
1 Mohm
1 kOhm
9 V Alkaline Battery or 48 V Phantom Power
Over 1000 hours

±12 dB 80 Hz, 570 mVp-p

±12 dB 400 Hz / 800 Hz, 490 mVp-p

±12 dB 3 kHz, 500 mVp-p

±12 dB 15 kHz, 500 mVp-p

500 Hz filter
Low  Battery check at 4.0 V
0.5 mA
2.5 mm Mono Jack
1/4″ Phone Jack with power switch
XLR Jack with power switch

Common features of HT Blender Series


MASTER VOLUME controls to adjust the amount of loudness of the post equalized sound from Piezo and Magnetic pickup.
PHASE REVERSE SWITCH is a push/pull anti feedback switch. It reverses the phase 180 degree instantly that cancel the feedback some extent. Phase reverse switch will help you feel free from the feedback while you are playing with other sound systems.
PHANTOM POWER LED indicates when 48 V phantom power is applied to the unit.
LOW BATTERY LED is an indicator that check the 9 V battery power automatically without operating a battery check switch. It will stay on constantly when the battery power is lower than 4.0 V alerting that the 9 V battery has to be replaced with new battery. 

Frequency characteristics

Nominal input level: 

Frequency Response: 
Input Impedance: 
Output Impedance: 
Power Supply: 
Battery Life: 
Bass control range: 
Middle control range: 
Treble control range: 
Presence control range: 
Low Battery: 
Current Drain: 
Input Jack: 
 Unbalanced Output Jack 
Balanced Output Jack 
Microphone Diameter 
Microphone Cells 

 

 

-20 dBV

20 Hz – 20 kHz
1 Mohm
1 kohms
9 V Alkaline Battery or 48 V Phantom Power
Over 1000 hours
Boost and Cut 12 dB 80 Hz, 570 mVp-p
Boost and Cut 12 dB 800 Hz, 490 mVp-p
Boost and Cut 12 dB 3 kHz, 500 mVp-p
Boost and Cut 12 dB 15 kHz, 500 mVp-p
Low  Battery check at 4.0 V
0.5 mA
2.5 mm Mono Jack
1/4″ Phone Jack with power switch
XLR Jack with power switch
9.6 mm
6 micrometer

 

 

 

 

  • Buying from a UK supplier.
  • See my feedback.
  • We care about our reputation.

 

 

 
  • Please read the description carefully before bidding, as a full and truthful description is listed.. Ask questions about the item and check postage costs.
  • By bidding on an item, the buyer agrees to our terms and conditions.
  • If a problem does arise please contact me to resolve the issue.
  •  Goods are checked before posting, however if faulty on delivery returns will be accepted with 7 days of arrival of goods.  We offer exchange or a refund if a replacement is not available. Goods must be in original condition, not tampered with in any way.
  • Buyer is responsible for all return shipping charges.

 

 

 
  • Direct Deposit
  • Paypal
  • Bank cheque
  • Postal order
  • Cash on collection(please enquire beforehand)
  • International cheques
  • International Bank transfer

 

 

 

 
  • All items are packaged securely and posted promptly on receipt of payment.
  • Postage charges includes the price of packaging and any cost incurred. The postage price is usually set by the weight and size of the item and is non refundable.
  • Registered post or insurance are encouraged.
  • 95% of our items come with registered postage. 

 

 

Additional information

Weight 0.6 kg