This listing is for an Artec HT-N Acoustic guitar preamp.
Comes with PP607 Piezo Pickup and PPO jack kit.
This item is brand new from Artec without official packaging.
Artec are one of the largest suppliers of preamps and you will find many rebranded preamps on high end guitars. Don’t waste your time with cheap preamps as you will not achieve a good sound and will end up with a hole in your guitar.
Fitting templates available at www.artecsound.com or message us at www.lifelongmusic.co.uk and we can email you the templates.
An advanced version of HT 4 with Notch filter switch.
Master volume controls to adjust the amount of loudness
Phase reverse switch is a push/pull anti feedback switch. It reverses the phase 180 degree instantly that cancel the feedback some extent. It will help you feel free from the feedback while you are playing with other sound systems.
Mid-Band shift switch can shift mid-band frequency down to 500 Hz.
Notch filter switch will work for filtering the frequency to cut the signal about 400 Hz.
Bass controls to adjust the amount of gain at 80 Hz while gain be adjusted +/-10 dB. Middle controls to adjust the amount of gain at 800 Hz, Treble controls of gain at 3 kHz, Presence controls of gain at 15 kHz and all controls can be adjusted 12 dB.
Low battery LED is an indicator that check the 9V battery power automatically without operating a battery check switch. It will stay on constantly when the battery power is lower than 4.0 V alerting that the 9 V battery has to be replaced with new one.
Nominal input level:
Bass control range:
Middle control range
Treble control range
Presence control range:
Unbalanced Output Jack
Balanced Output Jack
20 Hz – 20 kHz
9 V Alkaline Battery or 48 V Phantom Power
Over 1000 hours
±12 dB 80 Hz, 570 mVp-p
±12 dB 400 Hz / 800 Hz, 490 mVp-p
±12 dB 3 kHz, 500 mVp-p
±12 dB 15 kHz, 500 mVp-p
500 Hz filter
Low Battery check at 4.0 V
2.5 mm Mono Jack
1/4″ Phone Jack with power switch
XLR Jack with power switch